Not sure which product is best for your needs or how to use it?
Give our friendly sales and technical team a call
Designed for damaged concrete floors.
Florbinder is a two pack, water-based Epoxy primer which, when diluted, deeply penetrates into cementitious substrates thereby reinforcing and stabilising them. The product is non-flammable and has a zero V.O.C content. The fast drying characteristics allow a rapid return to service.
Pot life @ 20ºC: 60 Minutes
Viscosity@ 23ºC: 10cps (when diluted)
Drying Times @ 23ºC (one coat system):
Tack free @1 hour;
Hard dry @ 5 hours.
Adhesion to concrete: ³ 3MPa (substrate failure)
(7 days @ 20 ºC)
Do not apply to surfaces previously treated with water repellent chemicals.
Do not apply at temperatures below 5ºC, or if there is a risk of frost during the initial curing period.
Do not use after the pot life quoted above.
Do not apply in poorly ventilated areas.
R.H shall be below 85% during application
Health and Safety
Please refer to separate M.S.D.S.
Observe good hygiene practices.
The substrate shall be clean and free from dirt, dust, oil and grease. Any residues of release agent, existing floor coatings and other contaminants shall be removed by mechanical means, taking care to then remove any dust with an industrial vacuum cleaner.
Pour the contents of the Base component into the container in which the Curing Agent component is supplied. Mix together by mechanical means, e.g. by slow speed drill with paddle attachment, for a period of approx. 2 minutes. Then, slowly add the required quantity of water in 4 separate portions, ensuring that each portion is fully incorporated before the next one is added.
a) For application to green concrete as curing compound
add 2L water per 4kg mixed binder (as supplied). This gives a solids content of 48% approx.
b) As a deep penetrating primer
add 8L water per 4kg mixed binder (as supplied). This gives a solids content of 24% approx.
Apply by brush, roller , squeegee or airless spray at a nominal rate of 0.15-0.20 kg/m².
For porous substrates a second coat may be required, applying this following a minimum drying period of 1 hour for the first coating. The second coat shall be applied at a nominal rate of 0.10-0.15kg/ m².
Clean equipment with Reprotec Toolclean, or a blend of Reprotec Toolclean and water, immediately after use.
For a 2 coat system allow to cure for a minimum period of 16 hours @ 20°C prior to trafficking. Good ventilation is essential to allow satisfactory evaporation of water from the primer.
Storage and Shelf Life
Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C.
Reprotec PEP has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions.
- Reinforcement/consolidation of unstable or porous old cementitious screeds.
- As a dust proofer/sealer.
- Internal and external slab applications
- As a deep penetrating primer for coating systems
- As a concrete curing compound for green concrete.
- Overcoatable with subsequent top coats.
- Excellent adhesion to dry, damp, or green concrete.
- Suitable for minimally prepared old concrete.
- Fast drying.
- Taint free, zero V.O.C
- Easy to apply.