For Securing Kerb Stones & Other Building Materials
Kerbfix is the ideal product for securing kerb stones in place and the perfect epoxy adhesive resin for bonding other materials such as concrete, brick, metal, stone and wood. If you need to secure it, kerbfix can do the job! However, it is particularly suitable as a bedding mortar for securing kerb stones, brick edging and blocks in place, even in damp conditions.
A 10kg pack of Kerbfix will make approximately 5.7 litres of mortar which is sufficient to cover around 2.85m2 at 2mm thickness.
Use For Patch Repairs
Got a loose block, brick, stone? You can use Kerbfix for more than just kerb repair! It’s also great for patching cracked concrete, securing loose footing plates, even wobbly decking planks can be kept in place with an application of Kerbfix. The thixotropic nature of this 2 pack epoxy adhesive makes it a suitable for repairs to vertical and even overhead surfaces.
Easy Mix, Fast Curing Kerb Repair Mortar
This epoxy bedding mortar is easy to mix using a stiff spatula or slow speed drill with paddle attachment. You can then apply it to the two surfaces to be bonded by using a spatula, trowel or stiff bristle brush. Simply push the two surfaces together until you’ve reached the required bond thickness and remove and excess. Leave to cure for 6-8 and you’re all set!
Find Out More
Want to know more about Kerbix or our range of concrete repair kits? Contact our advice line on 0191 389 7067 and talk to a specialist.
- Pot life @ 20C: 50 Minutes
- Colour: Light Grey
- Specific Gravity: 1.5g/cm³
- Compressive Strength: 30MPa (1 day @ 20°C)
- 60MPa (7 days @ 20°C)
- Tensile Strength: 8N/mm²
- Moisture resistance: <0.4% increase @ 28 days
- (BS 6319: part 8)
- Lap Shear Strength to grit blasted steel: 12MPa.
- Shrinkage on curing: Negligible
- Hold up: >15mm
- Application temperature range: 3°C-40°C
Reprotec Kerbfix is supplied in 10kg packs, each of which yields 5.7 litres of mortar.
A 10kg pack yields 5.7L of mortar, sufficient to cover 2.85m² at a thickness of 2mm.
Reprotec Kerbfix shall be applied strictly in accordance with the manufacturer’s instructions.
Reprotec Kerbfix is a versatile thixotropic mortar being particularly suitable for bedding tiles and fixing brick slips to concrete
Reprotec Kerbfix may also be used for thin section concrete repairs and bolt fixing in walls or overhead.
- High Strength
- Excellent adhesion to most building materials
- Bonds to damp substrates
- Low odour
- Thixotropic nature facilitates application in both vertical and overhead locations
- Very good chemical properties and cohesive strength
- Resistant to water, weathering and a wide range of chemicals
- No primer required
- Creep resistant
- Easy to trowel