Chemical Resistant Epoxy Paint
Bundcoat has been especially been designed for use in areas where a high level of chemical resistance is required. It has outstanding resistance to aggressive acids, solvents and alcohols such as sulphuric acid, methyl ethyl ketone and methanol. This chemical resistant paint is particularly suitable for use in the chemical, pharmaceutical, food & beverage industries as well as in areas used for water treatment and oil refineries.
For Floors, Walls & Bunded Storage Areas
You can use this epoxy paint in areas where chemicals or toxins are going to be stored, handled and processed. As the name suggests, it is particularly suitable for bunds and bunded areas. It gives a high gloss finish that is easy to clean.
Anti-Slip Options Available
If you want to use this chemical resistant paint on floors as well as walls of storage areas we are able to provide it with a texturing agent to give the paint anti-slip properties. Please contact us for more details.
Rapid Cure Epoxy Coating
This easy to mix epoxy paint can be dry enough for light foot traffic in as little as 6 hours and will be fully chemical resistant in 5 days*. It is supplied in 5kg packs and available in 8 different colours. If you are going to apply this paint to particularly porous concrete surfaces we recommend using Chemprime as a first coat. Each 5kg pack of Bundcoat will treat up to 8.3m2 with the two coat treatment.
Find Out More
If you want to know more about how our range of chemical resistant paints can help you achieve the perfect finish, contact our advice line and talk to a specialist.
*Please see the specifications for more details.
- Coverage: 0.25-0.30kg/m²/coat
- Tack free time @ 20°C: 3 hours
- Hard dry time@ 20°C: 6 hours
- Full chemical resistance @ 20°C: 5 days
- Blue Sky (RAL 5015)
- Iron Grey (RAL 7011)
- Leaf Green (RAL 6002)
- Silver Grey (RAL 7001)
- Oxide Red (RAL 3009)
- Safety Yellow
- Auto Grey (10 A 07)
Reprotec Bundcoat is supplied in 5kg packs
Allow to cure for a minimum of 6 hours @ 20°C prior to light foot traffic access and 24 hours @ 20° prior to vehicular trafficking.
Allow a minimum of 5 days cure @ 20°C for optimum chemical resistance.
A 5kg pack is sufficient to treat 16/18m2 of surface with a one coat treatment, providing an overall dry film thickness of 250 microns (0.25mm per coat)
Reprotec Bundcoat shall be applied strictly in accordance with the manufacturer’s instructions.Coverage approx. 16/18m² per 5Kg Pack per coat. One coat is normally sufficient. Two coats are recommended.
Interior or Exterior
Concrete Floors and Walls, Bunded Storage Areas
Chemical, Pharmaceutical, Food & Beverage, Water Treatment, Oil Refineries
- Solvent Free, Low Odour
- Flexible with Anti-Slip Resistance
- Tough and Durable
- Easily Applied
- Hygienic & Can Be Easily Cleaned
- Good Chemical Resistance