Not sure which product is best for your needs or how to use it?
Give our friendly sales and technical team a call
Easy to Use Concrete Floor Paint
Easiflor is a water dispersible epoxy coating, but don’t let that complicated description fool you, it’s really easy to use. Supplied in two packs, you just have to mix together the two agents then apply to your floor with a brush or roller.
User and Environmentally Friendly
As well as being simple to use, the paint itself is low odour and contains no solvents. Even the packaging is recyclable. The finished painted surface is also extremely easy to clean making it extremely hygienic.
No Primer Required
If your floor is in good condition you may be able to use a single coat of Easiflor, however, we recommend using two coats and thinning the first with 5% of clean water before application. If your floor is a little worse for wear, fill any pre-existing holes with Floor Doctor or Deepfill. Easiflor can be applied to dry or damp surfaces.
Tough Anti-Wear and Chemical Resistant Finish
Painting a floor with Easiflor means it is both decorative, (there’s over 10 colours to choose from), and practical. It is abrasion resistant and suitable for application in areas where chemicals are going to be used. In particular it offers excellent resistance to diesel, anti-freeze, hydraulic oils and de-icing salts making it a great choice for both domestic and industrial garages and workshops.
Find Out More
If you want to know more about how our range of floor paints can help you achieve the perfect finish, contact our advice line and talk to a specialist.
- Pot life
- @ 20C: 90 Minutes
- @ 10C: 150 Minutes
- Application Temperatures: minimum = 3°C - maximum = 30°C
- Coverage: 0.20-0.25kg/m²/coat
- Red Cherry (04 D 45)
- Blue Sky (RAL 5015)
- Auto Blue (20 E 51)
- Silver Grey (RAL 7001)
- Iron Grey (RAL 7011)
- Auto Grey (10 A 07)
- Leaf Green (RAL 6002)
- Oxide Red (RAL 3009)
- Safety Yellow
Reprotec Easiflor is supplied in 5kg packs which should cover between 20/25m² per coat per pack.
This is around £3 per square metre on a reasonable floor per coat.One coat may be sufficient on a good floor - two coats are recommended. (first coat can be thinned with 5% clean water).
Allow to cure for a minimum of 24 hours @ 20°C prior to light foot traffic access and 48 hours @ 20° prior to vehicular trafficking.
7 days cure @ 20°C is recommended prior to exposure to chemicals.
Good ventilation is essential for satisfactory curing of the coating.
Lower temperatures will extend the curing time.
2 coats are recommended a 5Kg pack is sufficient to treat 20-25 m2 of surface per coat - the recommended two coat treatment will provide an overall d.f.t. of 200-250 microns.
Do not apply to wet or uncured concrete surfaces.
Do not apply at temperatures of 3°C or less.
In poorly ventilated areas forced extraction must be provided.
Reprotec Easiflor Coating shall be applied strictly in accordance with the manufacturer’s instructions.
Domestic or commercial
Concrete floor paint
All, but particularly garages, workshops, warehouses, food preparation, abattoirs, dairies, laboratories
- May be applied to dry or damp surfaces
- Available in a range of colours
- Low odour
- Easily applied
- Excellent resistance to water, oils, skydrol, petrol, dilute acids, alkalis and many solvents.
- Very good adhesion to concrete
- Hygienic and easily cleaned.