Reprotec Tufflor is the perfect choice when you are looking for concrete floor paint that is tough, waterproof, hard working and long lasting. It can be used as an interior floor paint for areas where you get lots of footfall such as warehouse aisles, factory floors, showrooms; it can also be used for areas of high vehicle traffic like loading bays or garages and workshops.
Quick Drying Floor Paint
The paint is supplied as a solvent free epoxy coating consisting of two packs; the base agent and the curing agent. They are easy to mix together and the paint can be tack free in as little as just 6 hours, and hard dry in less than a day. This means you can get back to work almost straight away and don’t have to suspend operations to complete the project.
No Need for a Separate Primer
If your floor is well prepared you can use two coats of Tufflor to finish the job without the need for a primer or a sealer. If a primer is required we recommend using Florprime.
Floor Paint Colours
Tufflor is available in a range of colours including Black, Grey, Green, White and Blue. You can also purchase it in 5kg or 15kg packs, depending on the size of your project.
Find Out More
If you want to know more about how our range of floor paints can help you achieve the perfect finish, contact our advice line and talk to a specialist.
Specifications
Colours:
Red Cherry (04 D 45)
Blue Sky (RAL 5015)
Auto Blue (20 E 51)
Silver Grey (RAL 7001)
Iron Grey (RAL 7011)
Auto Grey (10 A 07)
Leaf Green (RAL 6002)
Oxide Red (RAL 3009)
Safety Yellow
Black
White
Packaging
Reprotec Tufflor is supplied in 5kg packs
Reprotec Tufflor is also supplied in 15kg packs in three colours only:-
Auto Blue (20 E 51)
Auto Grey (10 A 07)
Silver Grey (RAL 7001).
Time available for application after mixing
@ 20°C = 45 Minutes
@ 10°C = 90 Minutes
Drying Times
Tack free time @ 20°C: 6 hours
Hard dry time@ 20°C: 10 hours Full chemical resistance @ 20°C: 7 days
Coverage
0.25-0.30kg/m²/coat A 5kg pack is sufficient to treat 16/20 m2 of surface area per coat we recommend a two coat treatment using either Reprotec Florprime as the first coat followed by Reprotec Tufflor, or two coats of Reprotec Tufflor, providing an overall d.f.t. of 400-500 microns. (0.4 -0.5 mm.). It is possible on a good floor that one coat of Reprotec Tufflor will give you the desired finish.
Reprotec Tufflor should be applied strictly in accordance with the manufacturer’s instructions.