3M™ Scotchkote™ Epoxy Coating Floor Coating HB 850
has been specifically developed as a 100% solids protection system for application to a wide range of floor surfaces.
• Combines good application characteristics with excellent chemical resistance.
• Designed for application by brush or roller.
• Suitable for use on most floor surfaces in conjunction with the appropriate primer.
All surfaces should be clean, dry and free from loose material.
Porous Concrete Surfaces should have all surface laitance removed by mechanical means, then primed with 3M™ Scotchkote™ Epoxy Sealer SP 810
Non Porous Surfaces: Quarry tiles and power floated concrete
should be primed with 3M™ Scotchkote™ WB Epoxy Primer GP 830.
Existing Coatings: should first be checked for adhesion to the substrate then be primed with
Scotchkote WB Epoxy Primer GP 830.
The product is a two component material comprising Part A
component and Part B component which must be mixed together prior to use.
The Part A component should be stirred and whilst continuing stirring, the Part B component should be added with mixing
continuing until a homogeneous mix results. The use of a mechanical mixer is advisable to ensure thorough and complete mixing.
The mixed product must be used within 45 minutes of mixing at 20°C (68°F)
Coverage will vary depending on condition of the floor but a 5 Ltr pack will cover between 20/25 m2
Don't forget your accessories...
Make sure you have everything you need with our essentials accessory pack which includes all you need to apply 2 coats of Ecoguard HB (2 coats are usually recommended)