This advanced formulation contains glass flake reinforcement which provides excellent resistance against chemical attack. Watco Bund Sealer cures to form a hard surface film which withstands heavy traffic. One thick brush applied coat is generally sufficient, although two coats can be applied to porous, open textured surfaces or to achieve a watertight seal over wider cracks and joints. Vulnerable cracks and joints, such as between the wall and floor, can also be further strengthened using Watco Fibreglass Reinforcing Tape. Watco Bund Sealer is suitable for use both indoors and outdoors and will cure at temperatures as low as 5°C. Watco Bund Sealer carries CE Mark EN1504-2 and has excellent test results for chemical resistance. It also has an A+ VOC emissions rating with a low level of VOC
Where to use
- Protection to metal tanks and pipes
- Can be used to protect metal and concrete structures prior to sinking into earth or water.
14m² per 4L
PRODUCT DATA SHEET | DOWNLOAD
MSDS SHEET - BASE | DOWNLOAD
MSDS SHEET - CURING AGENT | DOWNLOAD
Don't forget your accessories...
Make sure you have everything you need with our essentials accessory pack which includes all you need to apply 2 coats of Ecoguard HB (2 coats are usually recommended)