Watco Flowpatch | A Pourable Mortar For Filling Holes In Concrete, Inside And Out

 Watco Flowpatch is an easy to mix, pourable material for quick repairs to concrete inside or outside. Watco Flowpatch is very strong and hardens quickly; it will accept heavy traffic (including forklifts) only 2 hours after application. Watco Flowpatch will resist oils and grease. It can be applied at any depth between 5mm -100mm and repairs can be feather edged in light traffic areas. When mixed, Watco Flowpatch will be pourable so is not suitable for repairs to sloping floors or exposed edges. After curing, Watco Flowpatch can be painted with any suitable Watco floor paint. If the floor being repaired is very rough, you may wish to screed the whole floor with Watco Flowtop® for a smooth flat surface before painting. The surface is inherently anti slip in dry conditions. Overcoating with Watco Safety Grip® is recommended if a coarse anti slip is required in very wet or oily conditions

Where to use

 • Ideal for filling deep holes before screeding with Watco Flowtop

Coverage

 0.5m2 at 25mm thick

Data Sheet   

    PRODUCT DATA SHEET | DOWNLOAD

    MSDS SHEET - BASE | DOWNLOAD