High Performance Epoxy Wall Paint
Easiwall is provided as a 2 pack epoxy resin wall paint that is easy to mix and just as easy to apply. What’s more, because it is water dispersible you can clean all your utensils in water after application.
Suitable for a Variety of Surfaces
You can use Easiwall on concrete walls as well as block and render. It is also suitable for refurbishing ceramic tiles. Use Easiwall to paint walls in workspaces, factories and warehouses as well as corridors and walkways for an easy clean, hygienic finish. Because it is resistant to oils and chemicals it is also a good choice for commercial and domestic garages.
Available in a Range of Colours
Choose between the basic colours of black and white or go for something brighter such as red, blue, yellow or green. Easiwall is available in over 10 colours so you can pick the right one for you scheme. You can even use different colours to mark out different areas and access zones. A 5kg pack of Easiwall will cover up to 25m2 of wall surface area per coat.
Find Out More
If you want to know more about how our range of floor and wall paints can help you achieve the perfect finish, contact our advice line and talk to a specialist.
- Pot life:
- @ 20C: 90 Minutes
- @ 10C: 150 Minutes
- Application Temperatures: minimum = 3°C - maximum = 30°C
- Coverage: 0.20-0.25kg/m²/coat
- Red Cherry (04 D 45)
- Blue Sky (RAL 5015)
- Auto Blue (20 E 51)
- Silver Grey (RAL 7001)
- Iron Grey (RAL 7011)
- Auto Grey (10 A 07)
- Leaf Green (RAL 6002)
- Oxide Red (RAL 3009)
- Safety Yellow
Reprotec Easiwall is supplied in 5kg packs which should cover between 20/25m² per coat per pack. This is around £3 per square metre on a decent wall, per coat. One coat may be sufficient on a dense or previously coated wall - two coats are recommended (first coat can be thinned with 5% clean water).
Allow to cure for a minimum of 24 hours @ 20°C
7 days cure @ 20°C is recommended prior to exposure to chemicals.
Good ventilation is essential for satisfactory curing of the coating.
Lower temperatures will extend the curing time.
2 coats are recommended a 5kg pack is sufficient to treat 20 - 25 m2 of surface per coat, with the recommended two coat treatment, providing an overall d.f.t. of 200-250 microns.
Do not apply to wet or uncured concrete surfaces.
Do not apply at temperatures of 3°C or less.
In poorly ventilated areas forced extraction must be provided.
Reprotec Easiwall shall be applied strictly in accordance with the manufacturer’s instructions.
As a wall coating in food factories, abattoirs, dairies, laboratories, garages, factories, warehouses, ceramic tiles etc.
- May be applied to dry or damp surfaces
- Available in a range of colours
- Low odour
- Easily applied
- Excellent resistance to water, oils, blood, animal fats, detergents, chemical cleaners etc
- Very good adhesion
- Hygienic and easily cleaned.