Osmo Garden Furniture Oil

• Easy and seamless application
• Improves and maintains the appearance of wood
• Suitable for both hardwoods and softwoods
• Exceptionally high coverage
• Woodstain stays workable while coating
• Safe for humans, animals and plants once dry (biocide-free)
• Highly water and dirt resistant
• Microporous, penetrating finish which does not crack, peel or flake
• No sanding necessary when topping up coating
  

Instructions

Surface Preparation

• Wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks. Pressure-impregnated wood, Massaranduba,Bangkirai or Garapa need to weather off for at least 3 months. De-grey any already greyed wood with Osmo Wood Reviver Power-Gel before applying Osmo Garden Furniture Oil. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Garden Furniture Oil is ready to use. Do not thin. Stir well before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. Always wear a dust mask while sanding. If possible, please apply the first coat to all sides before installation. If additional protection against blue stain, rot and insect attack is desired, pre-treat the wood, if possible on all sides, with Osmo WR Impregnation.

  The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Method Of Application

• With a stiff brush (Osmo Flat Brush) or a lint free cloth, apply thinly and evenly to the clean and dry wood surface. Always work with wood grain. Apply thinly and evenly. Ventilate well while drying. Then apply the second coat – also thinly.

Care

• Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.

   

• Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.

   

• Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Note

• Osmo Garden Furniture Oil is clear; therefore it offers no UV protection (greying). Due to their surface properties, ribbed or rough saw wood surfaces absorb more product. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.

Suitability

Recommended

Exterior wooden furniture

For all other wood types not mentioned, always trial apply first.

• Oak
• Beech
• Ash
• Alder
• Birch
• Larch: Decking-Oil 009 Larch is optically suitable.
• Thermowood: Decking-Oil 010 Thermowood is optically suitable.
• Garapa: Decking-Oil 013 Garapa is optically suitable.
  

For the following wood types, WR Base Coat is recommended before use.

• Accoya®
• Kebony®
• Pine
• Spruce
  
• Douglas Fir: Decking-Oil 013 Garapa is optically suitable.

For the following wood types, a weathering period is recommended. New or sanded wood requires at least 12 weeks (approximate) exposure to the exterior elements before application.

After the weathering period, it’s generally recommended to clean the surface from the extractive content before application, always trial apply!

For all other ingredient-rich hardwood species not mentioned may require a varied period of exposure. Please contact us for further information.

• Sapele: 2 -4 weeks exposure.
• Rosewood: 4-6 weeks exposure. However, Natural Oil Woodstain 727 Rosewood is optically suitable and requires a weathering period of approx. 12 weeks before use of Natural Oil Woodstain.
• Douglas Fir: 6 weeks exposure. Application of WR Base Coat is also recommended.
• Larch: 6 weeks exposure. Decking-Oil 009 Larch is optically suitable. Application of WR Base Coat is recommended before use.
• Cedar: 12 weeks exposure.
• Iroko: 12 weeks exposure.
• Mahogany: 12 weeks exposure.
• Teak: 12 weeks exposure.
• Tropical Walnut: 6-8 weeks exposure.
• Merbau: 12 weeks exposure.
• Ipe: 6-8 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone.
• Pressure-Impregnated Pine: 12 weeks exposure.
• Garapa: 12 weeks exposure. 013 Garapa is optically suitable.
• Balau: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone.
• Bangkirai: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone.
• Massaranduba: 12 weeks exposure. 014 Massaranduba is optically suitable and a very popular choice of colour tone.
  

Coverage

• 24m²/L with one coat

Data Sheet   

    PRODUCT DATA SHEET | DOWNLOAD

    SAFETY DATA SHEET | DOWNLOAD