Pumacoat V is a two-component water dispersed epoxy coating for use on concrete and polymer modified cementitious screeds, cementitious renders, brickwork and block work. Pumacoat V is designed to provide a tough, hard wearing protective finish in a range of colours. Being water-based, Pumacoat V may also be applied to 7 day old ‘green’ concrete. Its easy to clean, silk finish makes the product ideal for industrial wall finishes in laboratories, farm buildings, warehousing, garages and other areas.
Where to use
Can be applied to damp substrates or used as a curing membrane to control water loss from concrete bases
Coverage
A minimum of two coats are required. Some
substrates , especially uneven surfaces will require
additional coats depending on profile and porosity. Light
or bright colours such as safety yellow or safety red may
require additional coats to achieve full opacity. As a
guide:
Porous or uneven substrates e.g. Brickwork, block
work:
1st Coat diluted 5 - 10 % by volume: 7 - 12 m2/kg
1 or 2 final coats undiluted: 7 - 9 m2/kg
Smooth/dense surfaces e.g. Dense brickwork, steel
trowelled renders:
1st Coat undiluted: 7 - 10 m2/kg
Final coat undiluted: 7 - 9 m2/kg
Dry/porous surfaces:
1st Coat diluted 10 - 20 % by volume: 8 - 10 m2/kg
1 or 2 final coats undiluted: 7 - 10 m2/k
Data Sheet
PRODUCT DATA SHEET | DOWNLOAD
DECLARATION OF PERFORMANCE | DOWNLOAD