Pumaguard SFS is a two-component virtually solvent free epoxy resin coating offering excellent abrasion and chemical resistance. Pumaguard SFS provides a tough, hard wearing coating for light and medium duty traffic giving high performance at an economical cost.
Where to use
Pumaguard SFS is a cost effective choice for areas such as food preparation, warehouse, production, storage, plant room and general factory flooring. A light broadcast of aggregate may be incorporated in order to give a degree of slip resistance.
Coverage
The coverage rate will vary depending on the texture
and porosity of the substrate, film thickness and
application technique. Two coats are normally sufficient
but on very porous substrates, an initial coat of
Pumaprime SF may be required. As a guide:
Normal substrate: 1st coat - 5.5 m2/kg
2nd coat - 9 m2/kg
Porous/uneven substrate: 1st coat - 3.6 m2/kg
2nd coat - 7.1 m2/kg
A full sand scatter with the excess aggregate removed
may achieve 3 m2/kg.
Data Sheet
PRODUCT DATA SHEET | DOWNLOAD
DECLARATION OF PERFORMANCE | DOWNLOAD