Sherwin-Williams Dura-Plate 301W is a low temperature curing, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions and over wet steel surfaces. Sherwin-Williams Dura-Plate 301W shows good chemical and abrasion resistance as well as good edge-retentive properties. It can be applied over steel prepared by hydro-blasting, grit blasting or mechanical tooling.
Sherwin-Williams Dura-Plate 301W is an anti-corrosive coating for long service life steel protection. It can be used for both immersion and above the waterline service in marine, offshore, construction and industrial applications. It is suitable for new building, conversion, repair or maintenance applications. It provides superior performance protecting areas such as ballast tanks, void tanks, crude oil tanks, slop tanks, mud pits, wet spaces, bilges, decks, external hull and steel bridges.
Where to use
It provides superior performance protecting areas such as ballast tanks, void tanks, crude oil tanks, slop tanks, mud pits, wet spaces, bilges, decks, external hull and steel bridges.
3.3m² per litre
PRODUCT DATA SHEET | DOWNLOAD
MSDS SHEET - BASE | DOWNLOAD
MSDS SHEET - CURING AGENT | DOWNLOAD
Don't forget your accessories...
Make sure you have everything you need with our essentials accessory pack which includes all you need to apply 2 coats of Ecoguard HB (2 coats are usually recommended)