Water Dispersible Protective Steel Coating
Steelcoat from RM Suppliers effortlessly treats steel as a high-performance and water dispersible epoxy coating. Designed to be user and environmentally friendly, it contains no solvents and has hardly any odour during application. 1 Litre of Steelcoat will treat between 4 - 6m2 giving an dry film thickness between 100-150 microns.
Easy to Clean
Steelcoat epoxy paint for metal boasts first-rate resistance to water, oils, skydrol, petrol, dilute acids, and alkalis as well as numerous solvents.
Easy to Apply
This high-grade steel treatment can be easily applied by brush or roller to provide a durable and abrasion and chemically resistant coating of excellent integrity. We recommend applying Steelcoat Primer first for the best results.
Find Out More
Steelcoat Finish promises premium results for your steelwork as well as an anti-graffiti coating. Get in touch with one of our experts today for more information.
- Pot life:
- @ 20C: 90 Minutes
- @ 10C: 150 Minutes
- Application Temperatures
- minimum = 3°C
- maximum = 30°C
- Coverage: 0.20-0.25kg/m²/coat
- Volume Solids: 65%
- Temperature resistance: 75°C (dry), 65°C(wet)
- Chemical resistance: excellent resistance to water, dilute acids, dilute alkalis, glycol ethers, dibasic ester solvent, skydrol, etc. Please consult our Technical Department for specific advice.
- Red Cherry (04 D 45)
- Blue Sky (RAL 5015)
- Auto Blue (20 E 51)
- Silver Grey (RAL 7001)
- Iron Grey (RAL 7011)
- Auto Grey (10 A 07)
- Leaf Green (RAL 6002)
- Oxide Red (RAL 3009)
- Safety Yellow
Reprotec Steelcoat is supplied in 5Ltr packs.
Suitable mechanical treatment, such as grit blasting,
Wire brushing etc is recommended to ensure a clean, uncontaminated substrate.
A primer coat of Reprotec Steelcoat Primer is recommended at all times.
Pour the contents of the BASE container into the CURING AGENT container and thoroughly mix, preferably by mechanical means (see website for suitable accessories) until a uniform colour is achieved.
The mixed material may be thinned by the addition of up to a maximum of 10% by volume of clean, potable water.
Apply by brush, roller at a nominal rate of 0.20 to 0.25kg/sq.m. per coat equivalent to a dry film thickness of 100-125 microns.
A minimum two coat treatment is recommended, applying subsequent coats after a minimum interval of 16 hours curing. Ensure good ventilation after application, as this speeds up the physical drying stage of the curing process.
Clean equipment with water prior to curing of the coating.
If the coating has cured use Reprotec Toolclean.
Steelcoat Finish is a high-grade chemically resistant coating for steelwork in bund areas and works as a hygienic, easy-to-clean surface on most metallic surfaces. Also works well as an anti-graffiti coating.
Please note that Steelcoat Finish is not recommended for galvanised steel.
- Low Odour
- Easy Application
- Excellent Resistance to Water, Oils, Skydrol, Petrol, Dilute Acids, Alkalis and Many Solvents
- Excellent Steel Adhesion
- Hygienic, Easy to Clean
- May Be Applied to Damp Conditions
- Available in a Full Range of Colours