Watco ArmourGrip is a unique formulation which offers significant advantages over conventional anti slip paint coatings. It would take many years of constant heavy traffic for signs of wear to show. This is achieved using a heavy duty, high build epoxy resin coating topped with Iron Silicate grit which forms the wearing surface. This aggregate is so hard (7.5 on the Mohs mineral hardness scale) that it will not wear away like a paint coating. The attractive, mid gloss aggregate will take constant heavy traffic making it ideal for heavily used aisleways, ramps or loading bays where a safe, non-slip surface is required. Little or no maintenance is an advantage in constantly busy areas where downtime is difficult. It can be used inside and outside on slippery ramps, paths, vehicle turning areas etc. It is highly versatile and can be applied to concrete, metal or wood; usually without any need for a primer. The ‘cold weather’ formulation allows for essential safety and maintenance work to be undertaken at temperatures as low as 5°C.
Where to use
- Very heavily trafficked floors
- Loading bays
- Vehicle turning areas
- Any wet, oily, slippery surface inside or out
10m² per 4L
PRODUCT DATA SHEET | DOWNLOAD
MSDS SHEET - BASE | DOWNLOAD
MSDS SHEET - CURING AGENT | DOWNLOAD
MSDS SHEET - AGGREGATE | DOWNLOAD
Don't forget your accessories...
Make sure you have everything you need with our essentials accessory pack which includes all you need to apply 2 coats of Ecoguard HB (2 coats are usually recommended)