Need help? Give us a call on 0191 389 7067
Watco Concrete Floor Paint - Anti Slip | Single Pack Pre-blended Anti Slip Coating
Watco Concrete Floor Paint - Anti Slip | Single Pack Pre-blended Anti Slip Coating
Couldn't load pickup availability



Our unique formula is based on a blend of resins and polyurethane, which produced a ‘Best in Class’ single pack paint for general use. This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish. Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish.
All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this ‘Best Ever Formulation’ to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion.
Features
- Professional quality, single pack polyurethane coating
- Transforms and dustproofs drab, stained concrete
- Ideal for identifying production and storage areas and traffic aisles
- Easy to use and easy to keep clean
- Superior performance demonstrated by ISO testing to CE mark EN 1504-2
- High Gloss, Matt & Anti Slip versions available
- Available in 190 RAL colours
Curing Times | Recoat Time | Touch Dry | Light Traffic | Full Use | |
10°C | 24 hours | 16 hours | 48 hours | 72 hours | |
20°C | 16 hours | 10 hours | 24 hours | 36 hours | |
30°C | 16 hours | 6 hour | 24 hours | 36 hours | |
Light Traffic: Foot, trolley, pallet truck, occasional forklift |
Specification
Suitable for | Concrete, wood, most metals, existing well bonded paint |
Finish | Glossy, fine textured |
Interior or Exterior | Exterior, Interior |
Primer required | Not usually. See ‘Priming’ section in 'How to Apply' |
Composition | Single pack, solvent based polyurethane |
Number of components | 1 |
Coverage | 40m² per 5L per coat |
Recommended number of coats | 2 |
Wet film thickness | 120 microns |
Dry film thickness | 80 microns |
Curing time (at 20°C) | 24 hours |
Minimum application temperature | 10°C |
Shelf life | 12 months in unopened container |
Cleaning tools | White Spirit |
Where to use
- Production Areas
- Warehouses
- Workshops
Coverage
40m² per 5L per coat
Data Sheet
PRODUCT DATA SHEET | DOWNLOAD
MSDS SHEET | DOWNLOAD
LIGHT REFLECTIVE VALUES | DOWNLOAD
RAL COLOUR CHART | DOWNLOAD

Don't forget your accessories...
Make sure you have everything you need with our essentials accessory pack which includes all you need to apply 2 coats of Ecoguard HB (2 coats are usually recommended)
Call us on 0191 389 7067 or complete the below form for Sales & Technical Advice: