Watco Dampguard Advanced is a penetrative, water based epoxy resin damp proofing agent designed for use on internal walls and lightly trafficked floors. Generally, it guards against the percolation of moisture through concrete, brick and stone structures from inside or outside. It is hard wearing and highly chemical resistant. Watco Dampguard Advanced is microporous and therefore allows moisture vapour to pass through it. Do not apply a non porous finish over Watco Dampguard Advanced such as plaster, render, vinyl, tiles, paint (unless microporous) which will prevent it from breathing. Emulsion paint can be applied over the finished coating since it is generally permeable to moisture vapour. The surface should be abraded to provide a key. When applied as a two or three coat system to a sound surface with good mechanical key, Watco Dampguard Advanced will resist considerable hydrostatic pressure (tested to 20m+ head of water).
Where to use
- Floors in hospitals
- Food storage areas
- Dairies, laundries
- Inspection pits and tunnels
20m² per 3L per coat
PRODUCT DATA SHEET | DOWNLOAD
MSDS SHEET - BASE | DOWNLOAD
MSDS SHEET - CURING AGENT | DOWNLOAD
Don't forget your accessories...
Make sure you have everything you need with our essentials accessory pack which includes all you need to apply 2 coats of Ecoguard HB (2 coats are usually recommended)