Watco Epoxy Damp Proof Membrane can be used on new or old concrete and sand and cement floors to hold back damp. If a DPM has failed or perhaps was never installed in the first place, the features of this product will effectively suppress vapour and hold back damp. It can be overcoated after 16 hours with any Watco 100% solids coating such as Epoxicote High Build, Chemi-Coat, Safety Grip or Bund Sealer and after 24-48 hours with a water based Watco coating such as Epoxy Gloss Coat or Safety Coat. One thick roller applied coating is sufficient on average or good quality concrete.
Where to use
- Concrete floors subject to rising damp
- New or old concrete floors where a DPM has failed or was never installed
- Suitable for heavy wear areas
- Use on areas of damp concrete which cannot be surface dried prior to painting
20-25m2 per 8kg at 250 microns
PRODUCT DATA SHEET | DOWNLOAD
MSDS SHEET - BASE | DOWNLOAD
MSDS SHEET - CURING AGENT | DOWNLOAD
Don't forget your accessories...
Make sure you have everything you need with our essentials accessory pack which includes all you need to apply 2 coats of Ecoguard HB (2 coats are usually recommended)