Watco Flowpatch is an easy to mix, pourable material for quick repairs to concrete inside or outside. Watco Flowpatch is very strong and hardens quickly; it will accept heavy traffic (including forklifts) only 2 hours after application. Watco Flowpatch will resist oils and grease. It can be applied at any depth between 5mm -100mm and repairs can be feather edged in light traffic areas. When mixed, Watco Flowpatch will be pourable so is not suitable for repairs to sloping floors or exposed edges. After curing, Watco Flowpatch can be painted with any suitable Watco floor paint. If the floor being repaired is very rough, you may wish to screed the whole floor with Watco Flowtop® for a smooth flat surface before painting. The surface is inherently anti slip in dry conditions. Overcoating with Watco Safety Grip® is recommended if a coarse anti slip is required in very wet or oily conditions. Watco Safety Coat is available where a general level of slip resistance is required. Watco Flowpatch's Typical Compressive Strength at 20°C: 1 day: >20N/mm2, 7 days: >35N/mm2, 28 days: >45N/mm2. For repairs to ramps, steps and for reforming edges, we recommend Watco Concrex®. For resurfacing or levelling larger areas of rough or tamped concrete, please use Watco Flowtop. If greater chemical resistance is required, please use Watco Concrex
Where to use
- Ideal for filling deep holes before screeding with Watco Flowtop
Flowpatch: Approximately 0.5m² at 25mm thick per 25kg
PRODUCT DATA SHEET | DOWNLOAD
MSDS SHEET - BASE | DOWNLOAD
Don't forget your accessories...
Make sure you have everything you need with our essentials accessory pack which includes all you need to apply 2 coats of Ecoguard HB (2 coats are usually recommended)