Watco Flowtop | A Self-Smoothing Topping For Industrial Concrete Floors

Watco Flowtop® is designed as an industrial grade overlay for rough, damaged or
tamped concrete. It cures to a smooth, non-dusting surface that is tough enough to
withstand forklift trucks. It is not recommended as a levelling compound for existing
very smooth or powerfloated surfaces. Watco Flowtop® can be left as a highly practical
industrial finish or overpainted.
Watco Flowtop® does not need to be overpainted and can be left as a practical, nondusting surface. In common with cementious products, the shade of colour may vary
due to the nature of cement and site conditions. Where appearance is important Watco
epoxy resin coatings may be used to coat the surface. Water based epoxy resin coatings
may be used after 24 - 36 hours, allow 7 days before application of non water based
products. Avoid paints which contain strong solvents, such as xylene. If using a solvent
based paint other than a Watco product we recommend a trial area first.
Watco Epoxy Gloss Coat provides an excellent hard wearing, attractive surface. Watco
Safety Coat or Safety Grip® are 100% solids anti slip coatings which promote a safer
working environment. Watco Chemi-Coat® is ideal where a high degree of chemical
resistance is required. We do not recommend application of Watco Concrete Floor Paint
or any paint that may be affected by the residual alkalinity of the recently applied Watco
Flowtop®.

Where to use

• Industrial areas
• Garage workshops, showrooms,
production areas, warehouses etc.
• Rough, tamped or damaged concrete
prior to painting

Coverage

3.7m2 at 3mm thick. 2.3m2 at 5mm thick. 1.1m2 at 10mm thick. Flowtop should generally not be applied less than 3mm thick

Data Sheet   

    PRODUCT DATA SHEET | DOWNLOAD

    MSDS SHEET - PRIMER 1  | DOWNLOAD

    MSDS SHEET - PRIMER 2 | DOWNLOAD

    MSDS SHEET - POWER BLEND | DOWNLOAD

    MSDS SHEET - ADDITIVE | DOWNLOAD