Watco Polyaspartic Primer is a unique, two part resin that has been specially designed
before to using Watco’s range of polyaspartic coatings.
When applied by roller, Polyaspartic Primer primes and seals very porous or high suction
surfaces (such as sand and cement screed) to ensure a uniform finish and help prevent
air entrapment bubbles in the subsequent coating.
Polyaspartic Primer cures quickly, after just one hour it leaves a tacky finish which can
then be overcoated.
This product can also be beneficial when overcoating an existing, well-bonded paint
before using a Watco Polyaspartic coating as a top coat.
Use with the following Watco products: Cold Set Coating, Fastcoat, Food Safe Coating,
Protecta-Coat, Safety Coat Cold Cure and Safety Coat Food Safe
Where to use
- Production areas
- Loading bays
- Cold stores, walk-in fridges and freezers
- Interior and exterior
20m² per 2.5L
PRODUCT DATA SHEET | DOWNLOAD
MSDS SHEET - BASE | DOWNLOAD
MSDS SHEET - CURING AGENT | DOWNLOAD
Don't forget your accessories...
Make sure you have everything you need with our essentials accessory pack which includes all you need to apply 2 coats of Ecoguard HB (2 coats are usually recommended)