Watco Safety Grip

Watco Safety Grip and Safety Grip Cold Cure are heavy duty, coarse textured, anti slip, two pack epoxy resin coatings; they’re designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0°C, providing exceptional slip resistance in unheated areas or outside in the winter months. Watco Safety Grip Flex, a tough, flexible, two part polyaspartic coating provides a good level of flexibility for areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery

Where to use

• Slippery, hazardous, wet or oily areas
• Around machinery
• Steps, ramps/ disabled ramps, foot bridges
• Loading bays, walkways and entrance ways
• Car parks
• Around vibrating machinery (see Safety Grip Flex)

Coverage

5m2

Data Sheet   

    PRODUCT DATA SHEET | DOWNLOAD

    MSDS SHEET - BASE | DOWNLOAD

    MSDS SHEET - CURING | DOWNLOAD

    MSDS SHEET - AGGREGATE | DOWNLOAD